Canon Ultura Instruction Manual page 62

RECORDER
E
The camera's Auto Editing Function can remotely control almost all brands
and models of VCR. VCR remote control signals vary depending on model
and brand. First, choose the right RECORDER setting for your VCR. The
number indicates the VCR brand. The letter indicates the set of signals.
Brand
Canon
Aiwa
Akai
Fujitsu
Funai
Hitachi
JVC
Mitsubishi
NEC
Panasonic
Blaupunkt
Quasar
Notes:
• Once you find the correct setting, remember this and do not change it unless you
change VCRs.
• See p. 67 for details of the "cut-in" and "cut-out" adjustments.
• If you try all the numbers and letters, but the VCR has still not started to record:
– Check the VCR is ready to record, and on pause.
– Check the VCR can receive signals from where the camera is, and that
nothing is blocking the signals.
– Go back and try to set it again.
• If your brand of VCR is not on the chart, or you cannot find the correct setting,
try all the numbers with the command dial until the VCR starts to record.
• It is unlikely, but you may have a VCR the Auto Editing Function cannot
control. If so use the Simple Editing method on p. 71.
62
Settings Brand
1-A to 1-C Pioneer
2-A to 2-C Sanyo
3-A to 3-C Fisher
4 Sharp
5 Sony
6-A to 6-B Toshiba
7-A to 7-C GE
8-A to 8-D RCA
9-A to 9-D Magnavox
10-A to10-G Philips
Seleco
Rex
Settings Brand
11 Thomson
12-A to12-C Saba
Nordmende
13-A to 13-C Ferguson
14-A to 14-F Grundig
15-A to 15-B Nokia
16-A to 16-B Telefunken
Zenith
17-A to 17-B Samsung
18-A to 18-C GoldStar
Settings
18-A to 18-C
19-A to 19-C
20-A to 20-C
21-A to 21-C
22-A to 22-B
23
24-A to 24-B
25
as of August 1999