Playing Back A Memory Card - Canon MV930 Instruction Manual

Playing Back a Memory Card

You can display a single image, 6 at one time (index screen
(slide show
displaying them one by one (
1. Set the camcorder to
2. If the joystick guide does not appear on screen,
press (
3. Push the joystick (
To play back a movie on the memory card:
4. Push the joystick (
• Push the joystick (
the playback.
• Push the joystick (
• When the movie playback ends or is stopped, the first frame of
the movie appears as a still image.
• Push the joystick (
on the wireless controller for 8x fast forward/fast rewind playback.
Images not recorded with this camcorder, uploaded from a computer (except
the sample images
have been changed may not be played back correctly.
Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the CARD access indicator is flashing. Doing so could result
in data damage.
92
93). Use the Card Jump function to quickly locate an image without
93).
Joystick
) to display it.
) to move between images.
) towards
) towards
) towards
) towards
57), edited on a computer and images whose file names
mode.
/ .
/ again to pause/resume
to stop the playback.
or or press the REW
93), or one after another
During
playback
/FF button