End Search - Canon MV930 Instruction Manual

End Search

When you have played back a tape, you can use this function to locate the end of the last
recorded scene.
Joystick
In stop mode:
1. Open the FUNC. menu, select (
( ).
2. Select ( ) [EXECUTE] and press (
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of
the recording and stops the tape.
• Operating the joystick (
End search cannot be used once you unload the cassette.
End search may not work properly if a blank section exists on the tape.
You cannot use end search to locate the editing end of audio dubbing.
FUNC. button
) the end search icon
) to start the search.
, ) will cancel the search.
E
and press
63