List Of Messages - Canon MV900 Instruction Manual

List of Messages

Message
SET THE TIME ZONE,
DATE AND TIME
CHANGE THE BATTERY
PACK
THE TAPE IS SET FOR
ERASURE PREVENTION
REMOVE THE
CASSETTE
CHECK THE INPUT
CONDENSATION HAS
BEEN DETECTED
CONDENSATION HAS
BEEN DETECTED
REMOVE THE
CASSETTE
TAPE END
INCORRECT TAPE
SPECIFICATION
PLAYBACK IS
RESTRICTED
INPUT SIGNAL NOT
SUPPORTED
HEADS DIRTY, USE
CLEANING CASSETTE
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
COPYRIGHT PROTECTED
DUBBING RESTRICTED
70
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
Battery pack is exhausted. Replace or charge the battery pack.
Cassette is protected. Replace the cassette or change the
position of the protect switch.
Camcorder stopped operating to protect the tape. Unload and
reload the cassette.
DV cable is not connected, or the connected digital device is
turned off.
Condensation has been detected in the camcorder.
Condensation has been detected in the camcorder. Unload the
cassette.
Tape reached the end. Rewind the tape or replace the cassette.
You attempted to play back a tape recorded in HD standard.
You attempted to input video signal in HD standard through the
DV terminal.
Video heads are dirty. Clean the video heads.
You attempted to play back a copyright protected tape.
You attempted to dub a copyright protected tape.
Explanation
16
10
75
13
65
72
72
–
–
65
72
66
66