Join Calls To Create A Conference Call; End A Conference Call; Hold A Conference Call; Resume A Conference Call - Polycom VVX 450 Manual

1. Call a contact.
2. When the contact answers, select the Conference soft key.
The call is held.
3. Enter another contact's number or select a contact from the directory or the call lists.
4. When the contact answers, select the Conference soft key.
All call participants are added to a conference call.

Join Calls to Create a Conference Call

conference call.
1. Do one of the following
 When you have an active call and a held call, select the Join soft key.
 When you have an active call and more than one held call, select a held call and then
select the Join soft key.

The active call and the selected held call are joined into a conference. If you have multiple
held calls, the other held calls on the line remain held.

End a Conference Call

other participants will end
1. During a conference call, select End Call.

Hold a Conference Call

conference participants on hold.
1. Select Hold

Resume a Conference Call

hear the audio of everyone on the call.
1. Select Resume.
Page | 8
- You can join one active call and one held call into a
- When you end a conference call, your connection to the call and all
- When you place a conference call on hold, you place all
- Resuming a held conference call enables all participants to
T: 01672 552340 E: support@jpitsolutions.co.uk
Support hours: Mon- Fri 8:30am – 5pm