Hardware Overview; The Controller Cabinet - Siemens ST950 Handbook

3 H
ARDWARE OVERVIEW
3.1

The Controller Cabinet

Figure 2 and Figure 3 show the ST950 controller fitted in an ST950 Controller
Cabinet.
CET bars are installed in the base of the cabinet. The Master Switch Panel is
installed on the right hand side panel of the cabinet. Up to three I/O cards, dimming
transformer, termination blocks and cabling are installed on the rear panel of the
cabinet.
The 19" Controller Rack is installed in an equipment frame at the front of the
cabinet; this frame can be swung open to enable access to the rear of the frame
and to the cards and components installed in the cabinet.
Security classification
Version
Last Editor
Document Name
Copyright © Siemens Mobility Limited 2018. All Rights Reserved.
Figure 2 – ST950 Controller Cabinet
Unrestricted
5
Neil Atkinson
ST950 ICM Handbook
Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Page 17 of 125
Status Issued
Date 18-Dec-2018
Document No. 667/HE/46950/000