Juniper EX8200 Quick Start Manual page 5

Hide thumbs Also See for EX8200:

Related Topics

Published: 2009-09-21

CAUTION: Do not stack switch components. Return individual components in separate

boxes if they do not fit together on one level in the shipping box.

To pack EX8200 switch components:

Place individual components in antistatic bags.

Use the original packing materials if they are available. If the original packing

materials are not available, ensure the component is adequately packed to prevent

damage during transit. The packing material you use must be able to support

the weight of the component.

Ensure that the components are adequately protected by wrapping them well

with packing materials. Pack the component in an oversized box (if the original

box is not available) with extra packing material around the unit so that the

component is prevented from moving around inside the box.

Securely tape the box closed.

Write the RMA number on the exterior of the box to ensure proper tracking.

Returning an EX8200 Switch or Component for Repair or Replacement

Parts Inventory (Packing List) for an EX8208 Switch

Parts Inventory (Packing List) for an EX8216 Switch

Packing EX8200 Switch Components for Shipping