Table of Contents
Advertisement
Stopwatch/Timer
ScheduleCalc includes a stopwatch/timer
with buzzer and split/lap functions.
When activated, the timer can count up
from zero or down from an entered time.
The display accuracy can be set to show
zero to two decimal places.
While the timer is counting, a clock sym-
bol ( ) flashes at the bottom of the dis-
play. A star ( ) symbol appears if the
timer buzzer is set to "On." Timer values
can be used in calculations or stored in
Memory.
Note: The display accuracy and timer buzzer
can be set via the Preference function.
[Timer]
Displays, activates and stops the timer. If
a value is entered prior to activating the
timer, the timer acts as a countdown timer.
[S/Lap]
Freezes the display. Once the display is
frozen, the value displayed may be saved
in Memory by pressing [Stor] then the
register number. e.g., [Stor] 1.
[Off]
Note: Pressing the
key twice stops
and exits the stopwatch timer. Press
[On/C]
to reset the display.
34—ScheduleCalc™
Advertisement
Table of Contents
