Brother NC-7100W Quick Setup Manual page 6

2
Click Setup.
3
Click Wireless Setup Wizard.
4
Review the Welcome information and
when you are sure you have completed
the necessary tasks, click Next.
5
The search will display a list of found
Brother Wireless Devices. Select the
device you wish to configure and click
Next.
6
If your network supports DHCP, choose
Obtain an IP address automatically
and the NC-7100w will automatically
obtain IP address information from your
network.
If you want to manually enter the IP
address settings of the NC-7100w,
choose Set static IP address and
enter the necessary IP address settings
for your network.
After making your selection, click Next
and the Wizard will search for available
wireless networks.
The NC-7100w supports the
Automatic Private IP Addressing
(APIPA) protocol. If a DHCP server
is unavailable, the NC-7100w will
automatically assign an IP address
from the range 169.254.1.0 to
169.254.254.255.
English
5