Configuring The Print Server - Brother NC-7100W Quick Setup Manual

If the Brother wireless print server
you want to choose is not listed,
follow these steps:
1 Move your printer with the wireless
print server installed closer to your
PC, or reorient the print server and try
again.
2 Reset the print server back to its
default factory setting and try again.
See Other Information in this Quick
Setup Guide for information how to
reset to factory default setting.
3 Refer to Chapter 10 of the NC-7100w
Network User's Guide on the
CD-ROM we have supplied with
NC-7100w.
Continue to Step 3
®
For Mac OS
1
Click the AirPort status icon and select
Open Internet Connect....
2
Click the Network tab to see the
available wireless devices.
You can see the Brother wireless print
server in the Network option.
Select SETUP.
4
X 10.1 to 10.3 Users
3
Your wireless network is connected
successfully.
If the Brother wireless print server
you want to choose is not listed,
follow these steps:
1 Move your printer with the wireless
print server installed closer to your
PC, or reorient the print server and try
again.
2 Reset the print server back to its
default factory setting and try again.
See Other Information in this Quick
Setup Guide for information how to
reset to factory default setting.
3 Refer to Chapter 10 of the NC-7100w
Network User's Guide on the
CD-ROM we have supplied with
NC-7100w.
Step 3

Configuring the Print Server

1
Insert the CD-ROM into your CD-ROM
drive.
(For Windows
screen will appear automatically.
®
(For Mac OS
Double-click the NC7100w icon on your
®
Macintosh , and then double-click the
Start Here icon.
®
users) The opening
X 10.1 to 10.3 users)