Brother MP-21C User Manual page 31

USER'S GUIDE
2-10
4. Pull the wire up.
Fig. 2-11 Pull the Wire up
5. Fan the stack of paper before loading.
6. Load the paper stack with the printing (coated) side upwards. Align the
right side of the paper against the right hand side of the Auto Cut Sheet
Feeder. Make sure that the paper is stacked below the
load up to approx. 30 sheets of plain paper (75g / m
7. Adjust the Paper Guide to the left hand side of the paper and close the
Feeder Cover.
Fig. 2-12 Loading Paper
Note
When you install the Feeder onto the printer, make sure that the Feeder is
straight.
mark. You can
2
).