Recording A Message - Zoom H1 Operating

Operating the Zoom
You turn off the Zoom H1 the same way you turn it on.
To turn off the Zoom H1:
On the right side of the Zoom H1, slide
the Power switch all the way to the left.
Hold the Power switch to the left for about
1 second, then release.
The switch will return to the middle.
The screen will say Goodbye see you! then go blank when it is off.

2. Recording a Message

To start recording a message:
Press and release the
the Zoom H1.
To stop recording at the end of a message, it is the same
action:
Press and release the
the Zoom H1.
When the Zoom H1 is in recording mode:
o The light under the microphones will be solidly RED, not
flashing.
will appear in a black block in the lower part of the
o
screen.
o The number on the screen above REC shows the duration
of the recording so far.
H1
Recorder for Message Banking
Record button on the front of
Record button on the front of
o Once you press the Record button, start speaking promptly to
avoid empty space at the beginning of your message.
Likewise, stop recording promptly when you finish speaking.
Speak only one message per recording.
o
For further information see
Recording Messages for Message Banking
cont./...
2/5