Application Settings
9. APPLICATION SETTINGS
Scanshell.net offers a variety of operating modes, all controlled from the Settings panel.
Using this panel, you can control the application automation options that ease the scanning
process, control the scanning parameters, and set the saving mode with which images and
data are saved in the database.
To open the setup panel from the main screen, click on the Settings button in the tool bar,
or select Tools-> Settings from the main menu.
Note: All the settings will be saved per user.
GENERAL TAB
Auto Card Detection – If checked, Scanning starts automatically when a card is inserted
into the scanner. If unchecked - The user has to click the Scan button to begin scanning.
This option can also be toggled using the
screen.
This option is not available when the Scan source is set to From File.
Perform search when a key is pressed – If checked, the
will be disabled, and once the cursor is placed in the
perform a search each time a key is entered e.g., when the "s" key is pressed the application
Scanshell.net User Guide © 2005 Card Scanning Solutions
Figure 9-1: Setup - General tab
Auto Detect
Find
button in the button bar of the main
Go
button of the search facility
field, the application will
General Tab
62