Download Print this page
Toshiba 24E2KVG-A Owner's Manual

Toshiba 24E2KVG-A Owner's Manual

Air conditioner (split type) for general public use

Advertisement

Quick Links

OWNER'S MANUAL
AIR CONDITIONER (SPLIT TYPE)
For general public use
Indoor unit
RAS-22, 24E2KVG-A
Outdoor unit
RAS-22, 24E2AVG-A
R32
1120650279

Advertisement

loading

Summary of Contents for Toshiba 24E2KVG-A

  • Page 1 OWNER’S MANUAL AIR CONDITIONER (SPLIT TYPE) For general public use Indoor unit RAS-22, 24E2KVG-A Outdoor unit RAS-22, 24E2AVG-A 1120650279...
  • Page 2: Precautions For Safety

    PRECAUTIONS FOR SAFETY Read the precautions in this manual carefully before This appliance is fi lled with R32. operating the unit. ● Keep this manual where the operator can easily fi nd it. ● Read the precautions in this manual carefully before operating the unit. ●...
  • Page 3 PRECAUTIONS FOR SAFETY ● Do not use any refrigerant different from the one specifi ed (R32) for complement or replacement. Otherwise, abnormally high pressure may be generated in the refrigeration cycle, which may result in a failure or explosion of the product or an injury to your body.
  • Page 4 INDOOR UNIT DISPLAY REMOTE CONTROL 1 Infrared signal emitter 1 ECO (White) 2 Memory and Preset button (PRESET) 2 Wi-Fi access (White) 3 Start/Stop button 3 Hi-Power (White) 4 Mode select button (MODE) 4 Timer (White) 5 Air fl ow button 6 Fireplace/8°C button 5 Operation Mode - Cool (Blue)
  • Page 5 POWER-SELECTION AND SILENT ECO OPERATION OPERATION (OUTDOOR UNIT) To automatically control room temperature to save energy (except in DRY and FAN ONLY mode) Power-Selection ( Press : Start and stop the operation. This function is used when the circuit breaker is shared with other electrical Note : Cooling operation;...
  • Page 6: Maintenance

    DISPLAY LAMP BRIGHTNESS ADJUSTMENT REMOTE CONTROL A-B SELECTION To separate using of remote control for each indoor unit in case of 2 air To decrease the display lamp brightness or turn it off. conditioners are installed nearly. 1. Press and hold for 3 seconds until brightness level ( Remote Control B Setup.
  • Page 7 *Point remote control at air conditioner receiving WEEKLY TIMER OPERATION module then, press SET button until you hear the “PiPi” sound. This means the setting operation has been completed. As the air conditioner is receiving How to set WEEKLY TIMER the signal, you will hear separate “Pi”...
  • Page 12 1120650279...

This manual is also suitable for:

24e2avg-a