Page 1
2 x flat head screws 2 x pan head screws Installation: MISC00000271 03/2021 V3.0 1. Remove the screws and plastic guards from the KE Series receiver unit. 2. Remove the bottom and side screws from the KE Series transmitter unit.
Page 2
KE Series Single Rack Mount Kit - 2X-031G Installation Guide 3. Use the flat head and pan head screws provided to install the right and left mounting brackets. The example used in the diagram below is a KE Sereis transmiiter unit, the proceudre for connecting to a receiver unit is identical.