Page 4
This manual is an integral part of the machine and must therefore be kept intact and available to hand for the machine’s entire productive life. Any other document sent by SandenVendo is to be attached to the manual to form a complete dossier of the automatic vending machine.
Page 7
Instructions for the installer, maintenance technician and final user 1.4 Manufacturer SandenVendo Europe in Europe has been making significant advancements in the vending industry for many decades and is a powerful partner for excellence in quality, reliability and service. SandenVendo Europe are a “one-stop shop supplier”, offering a wide variety of vending...
Page 12
SandenVendo Europe S.p.A. recalls that the technical and performance of products can change without notice. “SandenVendo Europe S.p.A.”. reserves the right of making changes on their vending machines without any advice; moreover they declare that the vendors listed in this manual are in conformity with the following directives: 2006/42/CE (EC markings) and 2004/1935/CE.
2 VENDING MACHINE IDENTIFICATION 2.1 Identification Plate Each SandenVendo vending machine is identified by a model name and a specific serial number, which can be found on the plate, located on the outside on the back of the vending machine and inside above the drawer.
Page 19
Remove the packaging components or equipment supplied which could prevent the correct operation of the vending machine; The packaging materials must be disposed of respecting the environment. SandenVendo declines all responsibility for damage caused by failure to observe the precautions listed in this section. 3.2.1 Supplied Accessories The following "items"...
Page 20
Attention! Do not move the vending machine if loaded with products to avoid damage to the appliance. SandenVendo declines all responsibility for inconveniences due to non compliance with the positioning rules. 3.3.1 Installation environment features...
Page 21
Attention! SandenVendo Europe declines all responsibility for damages caused to people or things due • Incorrect installation. • Improper power supply.
Page 23
320 mm 20 mm SandenVendo reserves the right to approve the vend of the products only after testing them. SandenVendo is not responsible for uses and applications of the vending machine that are not covered in the explanations in this manual.
Never use pressured water cleaner or water jets. Never clean with blades or pointed objects. Attention! SandenVendo declines all responsibility for damage caused by failure to observe the precautions contained in the manual and the current regulations. 5.2 Recommended cleaning products...
Page 33
Defective board Replace the board Only technicians from SandenVendo Europe or authorized personnel may carry out operations that require the machine’s lower protection to be opened, because of possible risk of electric shocks and moving mechanical parts.