Nautilus 1100C User Manual

NAUTILUS-1100C/1240P(WF) MULTI-FUNCTIONAL ELECTRIC KILN USER MANUAL
PRODUCT INTRODUCTION:
THIS NAUTILUS-1100C/1240P(WF) MULTI-FUNCTIONAL ELECTRIC MUFFLE KILN WITH A PROGRAMMABLE
TEMPERATURE CONTROLLER AND A SPACIOUS 20.0 CUBIC LITRE CHAMBER HAS FOUR HEATING ELE-
MENTS AND IS ESPECIALLY DESIGNED TO WORK WITH MOST TYPES OF MATERIALS SUCH AS: GLASS,
WAXES, METALS, CLAYS, STONE, HOT ENAMELS AND MANY OTHER MATERIALS. THE NAUTILUS-1110C
AND THE NAUTILUS-1240P CAN REACH TEMPERATURES OF UP TO 1,100°C/2,012°F AND 1,240°C/2,264°F
RESPECTIVELY. THE KILN CAN BE USED BOTH HORIZONTALLY AND VERTICALLY. FOR YOUR SAFETY,
THIS KILN HAS A SECURE MECHANISM THAT WILL DISCONNECT THE KILN'S POWER SUPPLY FROM BOTH
THE RIGHT AND LEFT HEATING ELEMENTS IF THE KILN'S DOOR IS OPEN OR HAS NOT BEEN PROPERLY
CLOSED. IT ALSO HAS ONE VENTILATION HOLE WITH A STAINLESS STEEL SHUTTER ON THE DOOR AND
A DIGITAL OVER/UNDER TEMPERATURE DETECTION SYSTEM TO HELP MAINTAIN A CONSTANT TEMPER-
ATURE DURING THE ENTIRE SOAKING PROCESS. THIS KILN ALSO HAS A SMOOTHING CIRCUIT TO AL-
LOW THE PROGRAMMABLE CONTROLLER TO CORRECTLY READ AND STABILISE ELECTRICITY FLUCTUA-
TIONS, WHCH IS ESSENTIAL FOR MOST FIRING PROCESSES.
Pic. 1 HORIZONTAL POSITION:
TECHNICAL SPECIFICATION:
MODELS:
INPUT ON REQUEST:
POWER:
ESTIMATED MAXIMUM
HEATING TEMPERATURE:
ESTIMATED HEATING TIME
TO 1,240°C:
CONTROLLER TYPE:
CONTINUOUS WORKING
TIME AT 1,240°C:
CONTINUOUS WORKING
TIME BELOW 1,100°C:
NAUTILUS-1100C/1240P(WF) CALIBRATION:
115, 220 or 240 V
3,900 WATT / 16 A
1,100°C (2,012°F)
1,240°C (2,264°F)
90 MINUTES
TWO-LINE - PROGRAMMA-
BLE OR NOT PROGRAMMA-
10 MINUTES
8 HOURS
1
Pic.2 VERTICAL POSITION:
SOAKING PROCESS ACCURACY:
SAFETY MECHANISM:
WORKING POSITIONS:
HEATING ELEMENTS:
CHAMBER DIMENSIONS MM
(INCH) (horizontal position):
KILN DIMENSIONS MM (INCH):
(horizontal position):
WEIGHT:
YES
+/- 1°C
YES
VERTICAL OR
FOUR
200 (w) X 200 (h) X 500 (d)
(8" x 8" x 20")
375 (w) X 400 (h) X 700 (d)
(15" x 15" x 28")
50 KG