Advertisement
IMPORTANT NOTE: It does not matter which RED cable you connect to which socket on the rear
wall of the electrical box. Both red heating element cables are same.
Now you need to attach the safety-switch mechanism to your kiln. This mechanism is important for your
safety. It will disconnect all heating elements inside the chamber if your kiln's door is open or is not closed
properly. This is done to avoid electric shocks following accidental contact, for example with metal tongs,
flasks or the item(s) being fired.
To attach the safety-switch mechanism, take the ready-to-use mechanism from its pack and attach
it to the kiln using two screws (supplied) in the position shown in Pic. 4 below:
IMPORTANT!
After assembling, please ensure that the PRESSING "FINGER" FIRMLY PRESSES on the
SAFETY SWITCH when the door is OPEN (Pic. 13) and RELEASES the SAFETY SWITCH when the door is
CLOSED (Pic. 12).
3
Advertisement
