Operational Safety Guidelines - Motorola IMPRES NNTN7063 User Manual

Adaptive multi-unit charger
Hide thumbs Also See for IMPRES NNTN7063:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
09L67_IMPRES_MUC.book Page 3 Tuesday, December 29, 2015 11:43 AM
WARNINGS (continued)
6. The IMPRES Adaptive Multi-Unit Charger can only be
repaired by a qualified service technician authorized by
Motorola. Any violation of this policy can void unit
warranty.
7. To reduce risk of electric shock, unplug the charger from the AC
outlet before attempting any cleaning.
8. For fuse replacement, use only fuses of the same type and rating
listed on the charger label. Replace fuses with Cooper-Bussman
GDC-3.15 or approve equivalent only. The following parts can be
ordered from Motorola Radio Products and Services Division (1-
800-422-4210 [US and Canada] or 1-847-538-8023 [International]):

OPERATIONAL SAFETY GUIDELINES

• Turn the radio off when charging the battery.
• This equipment is not suitable for outdoor use. Use only in dry
locations/conditions.
• Connect equipment only to an appropriately fused and wired supply
of the correct voltage (as specified on the product).
• Disconnect from line voltage by removing the main plug from the outlet.
• The socket outlet to which this equipment is connected should be
close and easily accessible.
• For equipment using fuses, replacements must comply with the type
and rating specified in the equipment instructions.
• Maximum ambient temperature around the charger must not exceed
40°C (104°F).
• Make sure the cord is located where it will not be stepped on, tripped
over, or subjected to water, damage, or stress.
• This unit utilizes wall mount part number NLN7967.
Fuse
6587577G01
Cover
0987739G01
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents