Job Timeout; Panel Language; Auto Log Print; Id Print - Brother HL-4200CN User Manual

Job Timeout

The Job Timeout setting causes the printer to stop processing print data if it takes more than the preset
length of time for the remaining data to be received by the printer. When a job time-out occurs, the printer
only prints the data it received up to the time-out.
5 to 300 seconds (default: 30 seconds)
Set the job time-out between 5 and 300 seconds.
OFF
Deactivates the Job Timeout function.

Panel Language

Use this to set what language appears on the control panel.
See the Quick Setup Guide for information on how to change your language.

Auto Log Print

If you want the Print Logs to print automatically, turn this setting on.
You cannot change this setting while the printer is processing print data.
Use the '4 Report/List' menu to print logs.
No (default)
The printer does not print logs automatically.
Yes
The printer automatically prints a log after 22 print jobs.

ID Print

You can choose where you want the user ID to print on the pages.
OFF (default)
Upper Left
Upper Right
Lower Left
Lower Right
4 - 7 CONTROL PANEL