Brother HL-3260N User Manual page 213

O p e r a t o r C a l l M e s s a g e
O p e r a t o r C a l l M e s s a g e
O p e r a t o r C a l l M e s s a g e
NO TRAY xx
The indicated paper Tray was not
detected, install it, or ensure it is inserted
correctly.
NO MP TRAY
Install the MP Tray
NO PAPER T xx
Load paper into Tray xx
NO PAPER MP
Load paper into the Multipurpose (MP)
Tray
SIZE ERROR T xx
Specify the correct paper size for the
indicated tray
SIZE ERROR DX
The duplex unit can only print in the sizes
specified. Specify the correct paper size:
A4 or Letter
SIZE ERROR FS
The Finisher does not accept the size
specified.
SIZE ERROR ST
The Stapler does not accept the size
specified.
SIZE ERROR MX
The Mailbox unit does not accept the size
specified. Specify the correct paper size
A4 or Letter
SIZE MISMATCH
Paper mismatch between the Printer and
the Printer Driver setting. Load Paper xx
size into Tray xx
MANUAL FEED
Load Paper xx size into the Manual
Feeder, and press the Go button.
NO DX UNIT
Install the Duplex Tray
NO MX UNIT
Change the properties of the job or install
an MX Unit.
NO DRUM UNIT
A Drum Unit was not detected, please
install one
NO FUSING UNIT
A fusing Unit was not detected, please
install one
A c t i o n
A c t i o n
A c t i o n
There is no Paper cassette in Tray xx. Install the Paper
cassette into Tray xx.
There is no MP tray. Install the MP tray.
There is no paper in Tray xx. Load paper into Tray xx.
There is no paper on the Multi-purpose tray. Load
paper onto the Multi-purpose tray.
Paper size in Tray xx is wrong. Load the right size of
paper.
Paper size in the Duplex unit is wrong. Load the right
size of paper.
Paper size in the Finisher is wrong. Load the right size
of paper.
Paper size in the Stapler is wrong. Load the right size
of paper.
Paper size in the Mailbox unit is wrong. Load the right
size of paper for use in the Mailbox
Paper size is wrong. Load the right size of the paper.
Paper size on the Multi-purpose tray is wrong. Load
the right size of paper on the Multi-purpose tray.
There is no Duplex unit. Install the Duplex unit.
There is no Mailbox unit. Install the Mailbox unit.
There is no Drum unit. Install the Drum unit.
There is no Fusing unit. Install the Fusing unit.
6-2