Toshiba 43C350KP Owner's Manual page 17

• Gamma Calibration: Adjust selected Gamma curve.
• RGB Only: View images based on default settings or choose off,
red, green or blue.
Apply Picture Settings
Adjust current picture mode to apply to current source or all
sources.
Reset
Reset current picture settings to factory mode.
Sound
System sounds
Open the default system sound.
Sound Mode
Select a preset sound mode to suit the type of content you are
listening to.
Speakers
Select the speakers which you want to use.
Dolby Atmos
Turn the Dolby Atmos on or off.
NOTE: Dolby Atmos may not be supported depending on the
model.
TruBass HDX
Optimize overall sound quality by increasing bass, making dialog
clear and natural, and widening the sound field.
TruSurround: X
Provide surround sound experience with psycho-acoustic
processing to place sounds beside, behind, and above the viewer.
For best results use with Surround Sound.
Dialog Clarity
Improve dialogue clarity.
TruVolume HD
Maintain consistent loudness levels from wide dynamic range
programs, loud commercials, and channel or input changes.
NOTE: TruBass HDX, TruSurround: X, Dialog Clarity and
TruVolume HD may not be supported depending on the model.
Wall Mount Setup
Automatically optimize the sound based on the position of the TV.
Advanced Settings
Tune the audio settings and quality of the TV.
• Balance: Adjust the left and right speaker strength to optimize
audio for a specific location.
• Auto Volume Control: Turn Auto Volume Control on or off.
• Digital Audio Out: Select the digital audio output format that
best suits the audio device type.
NOTE: When connected the TV with optical, Dolby Digital Plus
is not suggested.
• Digital Audio Delay: Adjust the digital audio output delay time
to sync sound from an external speaker with the images on the
TV.
Menu
• Lip Sync: Synchronize the displayed image with the audio output.
• Equalizer: Boost the volume at different frequencies.
• Headphone Mode: Change the way audio is sent through the
type of device that's connected to your TV Audio Out port.
NOTE: Some models don't support this function.
• Headphone Volume: Independently adjust the volume of audio
out devices.
NOTE: Some models don't support this function.
Audio Type
• Audio Type: Select the audio type of programmes.
• Voiceover output: Select the voiceover audio out.
NOTE: Some models don't support this function.
• Voiceover volume: Independently adjust the volume of
voiceover.
Reset
Reset current audio settings to factory mode.
Channels
Tuner Mode
Select if you receive TV channels over the air (antenna) or through a
cable set top box as the input will be used during a channel scan.
Auto Scan
Automatically scan for channels to view programmes from your TV
source.
Channel Edit
Manually edit the channel list order to your preference.
Postal Code
Set the Postal Code.
NOTE
• This function may not be available in your country/region.
Advanced Settings
Adjust advanced settings for Channel.
• DTV Manual Scan: Search and store the channels under DTV
mode.
• ATV Manual Scan: Search and store the channels under ATV
mode.
• ATV Fine Tuning: Fine tuning current channel to improve the
programme picture.
• Channel List Auto-Update: Allow your TV auto-update the
channel list from the content provider.
• Language: Select a desired language from the list in DTV mode.
NOTE: This function may not be available in your country/
region.
• PVR&Time-Shift Settings: Initialize the external USB disk to
support PVR and Time-Shift. (Since the function record temporary
the program onto a hard disk only.)
16