General Operation; Turn On/Off Your Tv; Selecting The Input Source; Using The Live Tv - Toshiba 43C350KP Owner's Manual

Turn on/off your TV

Turn on your TV for the first time
Connect the mains cable to the mains socket after you have
completed all the connections.
The first time you turn the TV on, it will go straight into the
Installation Guide.
The guide setting is completed according to the boot navigation
prompt. The navigation information is specific to the actual
condition.
The Home screen will be your starting point for navigating the TV.
To turn your TV on or off :
1 Plug the AC power cord into a socket outlet of AC power supply.
2 When the TV is powered on, press the [
control, to turn TV on or off.
NOTES
・ When your TV is in standby mode, it is still consuming power. To
completely disconnect power, please remove the mains plug from
the mains socket.
If your TV does not receive an input signal for several minutes, it
・
automatically goes into standby mode.

Selecting the Input Source

Select the Input Source depending on the video device you have
connected to your TV.
To select the input source:
1. Turn on your TV, then press the [
the list of Source appears.
2. Press the [ Up / Down ] buttons to select the input source.
3. Press the [ OK ] button to confirm your selection.

Using the Live TV

To view broadcast programs, press the [
select Channels.
Channel search guide
When you select Channels as input, if no TV channels were saved before,
you will be prompted to do a channel search. You can also go to Menu >
Channels to change the channel settings.
Launch Live TV
After channel scanning is done for the first time, the screen will display
LiveTV operating tutorial, including: how to Load info Bar, how to load
the channel list and so on.
[ Up ] Load info bar
[ OK ] Load channel list
[ GUIDE ] Load EPG (GUIDE)
[ MENU / ] Load onscreen menu
[ Down ] Initiate PVR or Timeshift
[ / ] Jump to previous channel

General Operation

] button on the remote
] button on the remote, and
] button on your remote to
13
Viewing channel information
As you use the [ P / P ] button on your remote to scroll through
channels, an information banner appears on the top of the screen.
Viewing a channel list
After you have done an automatic channel scan (if you're using an
antenna) or receiving your channels through a cable provider, you can
view your list of channels by pressing [ OK ] button on your remote. You
will see the channel list display on the screen.
Creating and editing Favorites List
To quickly access your most-watched channels, you can create a Favorites
List.
To create and edit your Favorites List:
There are 2 ways to enter the edit menu ：
1. Press the [ OK ] button and the [ Left ] button on your remote when
viewing channels to select Channel List > Favorite List > Add fav
list (Max 4 fav lists can be added)
2. Press the [ ] button on your remote to access the Menu, and then
select Channels > Channel Edit > Favorite 1 > Add
Viewing your Favorite list
To view channels that you've added to your Favorites List simply press [
OK ] button on your remote to call out the channel list.
The channel list appears on the screen and heart-shaped icons are shown
next to the channels that make up your Favorites List.

EPG (GUIDE)

It provides convenience to check TV programmes that will be available
in the next 7 days. The information displayed by the EPG is made
available by the commercial television networks for digital channels
only. The EPG also provides a simple way to program the recording of
your favorite programmes and a reminder function which can switch
channel automatically at scheduled time so that you do not miss
programmes of interest. (The availability and amount of programme
information will vary, depending on the particular broadcaster).
In Live TV, press the [ GUIDE ] button on the remote control to display
channel information on program guide list.
Watch
In Guide (EPG), when a current programme is selected, press the [
OK ] button to watch.
PVR/Reminder/Detail
In Guide (EPG), press the [ Up / Down ] buttons to select the
channels, press the [ Left / Right ] buttons to select program based
on the time schedule.
Press the [ OK ] button to select PVR or Reminder.
Press the [ Up / Down / Left / Right ] buttons to change and set
different options.
channels.