Installation & Configuration
2
Using Web Interface
Windows Setup
Step
Installing the Wireless
Ethernet Converter-g
Install the Ethernet Converter to
a computer by connecting one end
of the included Ethernet cable into
an available Ethernet port on your
computer and the other end to the
Ethernet Converter. Ethernet ports
are usually located in the rear of the
computer.
Plug the AC Adapter into a wall
socket
or
(recommended). Connect the AC
Adapter
Converter.
(Be sure to use the AC Adapter
included with this product or
damage may result.)
Step
Configure the TCP/IP
settings of your computer
Open your network properties.
Connect Using should be set to use
your active Ethernet NIC Card.
Select
(TCP/IP).
Click Properties
2
surge
protector
to
the
Ethernet
Internet
Protocol