Step
Connect and configure your AirStation 54Mbps Router
Open your web browser and enter 192.168.11.1 into the browser
address field.
The AirStation 54Mbps web configuration page will open.
If at any time you wish to restore settings to factory defaults, press the red INIT
button on the rear of the AirStation for several seconds until the red DIAG light
illuminates.
*Reference the instructions in the User Manual for advanced configuration of
your AirStation 54Mbps Broadband Router Base Station.
You will be prompted to enter a User
ID and Password
User ID: root
Password: leave blank
(enter no password)
NOTE: These are the factory
default settings
DSL - DSL users can click the
DSL button and input the ISP
setup information for an easy
setup.
CATV - Cable users can click the
CATV button and input the ISP
setup information for an easy
setup.
Advanced - Users can click this
button
functionality such as WEP and
other Network settings.*
10
to
enable
advanced