Panasonic PV-C2062 Operating Instructions Manual page 25

All manuals and user guides at all-guides.com
*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
POWER POWER VOL VOL CH CH STOP/EJECT REW/ STOP/EJECT REW/ PLAY/REPEAT FF/ PLAY/REPEAT FF/ REC TIMER/FM REC TIMER/FM
REC ON TIMER PROG TIMER REC ON TIMER PROG TIMER
VIDEO IN VIDEO IN AUDIO IN AUDIO IN
ACTION ACTION
FF
REW
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
NUMBER
Keys
FF
REW
TAPE
POSITION
SEARCH
Model PV-C2062 remote shown.
LSQT0582A_P22-33.p65 25
Auto Operation Functions
Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
=> Power turns off
• This feature is canceled if any button is
pressed during above mode.
Auto Playback
Insert a tape in Power off mode
=> Power turns on
• Playback begins if tape has no record tab.
Auto Rewind
Tape reaches its end
=> Rewind => Stop
Playback Auto Eject (Repeat Play is "OFF")
Tape with no record tab reaches its end
Rewind => Stop => Eject
Tape Position Display
To find out present tape position and amount of tape
remaining.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
1
Press TAPE POSITION to detect
current tape position.
• "DETECTING TAPE POSITION"
is displayed only when a
DETECT I NG TAPE POS I T I ON
cassette is first inserted and it
takes several seconds for
correct tape position to appear.
• The present tape position
indication and amount of tape
SLP
remaining (according to tape
speed) is displayed.
R 120 MIN.
• Tape remaining time display may
BEG I N END not be precise.
2
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
Note
• This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over 120 minutes in length.
12/14/2001, 1:52 PM
25