Brother HL-1435 User Manual page 23

Do not put more than 250 sheets of paper (80 g/m
that paper is below the maximum paper mark ( ).
For two-sided printing, put the side that is going to be printed on (blank side) face down, with the
top of the paper at the front of the tray.
5
Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer.
Pull up the support flap to prevent paper from sliding off the top output tray.
If you choose not to pull out the support flap, we recommend that you remove printed pages
immediately after they come out of the printer.
6
Send the print data to the printer.
1 - 10 ABOUT THIS PRINTER
2
) in the tray, or paper jams may occur. Check
Figure 1-8
Figure 1-9