Table of Contents
Advertisement
Adjusting Noise Gate Settings
A noise gate controls the volume of an audio signal by attenuating the signal when it reg-
isters below the threshold. This is typically used to eliminate or minimize background
noise.
To adjust the noise gate settings for a channel:
1
On the appliance Web UI's main page, select DSP.
2
Select the Menu button for the channel.
3
From the drop-down menu, select Noise Gate.
Note: If you want to return to the factory settings, select the Reset icon that appears in
the right corner.
4
Adjust the following settings as needed:
Figure 15. Noise Gate Settings
35
Advertisement
Table of Contents
