Chapter 7 Appendix; Printer Specifications; Printing - Brother HL-1000 Series User Manual

CHAPTER 7
APPENDIX

PRINTER SPECIFICATIONS

Printing

Print Method
Laser
Resolution
Print Quality
Print Speed
Warm-Up
Electrophotography by semiconductor laser beam scanning
Wavelength: 780 nm
Output: 5 mW max
HL-820/1020: 600 dots/inch
(under Brother Printing Solution for Windows)
HL-1040: 600 dots/inch
(under Brother Printing Solution for Windows
/ under Brother Software PCL5e for DOS box
in Windows )
300 dots/inch
(under DOS, Apple Macintosh and other
operating system)
HL-1050: 1200 (H) x 600 (V) dots/inch
(for Windows DIB graphics)
600 x 600 dots/inch
(for Windows and DOS)
300 x 300 dots/inch
(using Apple Macintosh with the optional
RS-100M)
Normal printing mode
Economy printing mode (up to 25% and 50% toner saving)
HL-820 :
HL-1020/1040/1050:
(when loading A4 or letter-size paper from the multi-purpose
sheet feeder)
NOTE: Maximum print speed is obtained by printing several
copies of the same page. Print speed may vary depending on
interface type, emulation, processing power of the computer,
memory allocated to the print job, paper size and graphic
quality.
Max. 30 seconds at 23°C (73.4°F)
(The warm up time depends on the ambient temperature and
humidity.)

CHAPTER 7 APPENDIX

Up to 8 pages/minutes
Up to 10 pages/minute
A-1