Related Manuals for Bryston C Series BP26
Summary of Contents for Bryston C Series BP26
- Page 1 BP26 P R E A M P L I F I E R OWNER’S MANUAL For preamp models BP26, BP26DA, BP26MC & BP26P...
-
Page 2: Important Safety Instructions
Bryston authorized dealer to qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer accompanies the re-sale. The copy of the bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston. -
Page 3: General Specifications
2 pair balanced female XLR inputs 1 pair balanced male XLR outputs 5 pair RCA inputs 4 pair RCA + 1 pair phono inputs (BP26P & BP26MC only) 4 pair RCA + 2 SPDIF digital inputs (BP26 DA only) 2 pair RCA outputs... -
Page 4: Headphone Output
The Bryston BP26 pre-amps also feature two pairs of bal- anced XLR input jacks. Many signal sources, including CD- players and separate D/A converters are now available with Balanced outputs for minimum noise pickup on the cables. -
Page 5: Remote Control
Moving Magnet Phono Cartridge Input (MM): This is Bryston’s standard RIAA phono equalization stage. It is found in both the “-P” and “-MC” versions of the BP26 pre- amp. Input impedance is 50K ohms and sensitivity is 5mV. - Page 6 BP26 Preamplifiers FRONT PANEL CONTROLS: MUTE/NORMAL TOGGLE SWITCH: Mutes or releases mute at the main outputs, (not ‘To Tape’ outputs), without changing the volume control setting, each time pushed. POLARITY/INVERT TOGGLE SWITCH: Reverses polar- ity at main outputs each time pushed. (GREEN LED indi- cates positive polarity, YELLOW LED indicates inverse polarity).
- Page 8 BP26_MANUAL_20060324...