Brother HL HL-3070CW User Manual page 100

Network for HL-3070CW users (continued)
Submenu 1 Submenu 2
WLAN
Status
(Appears only
when WLAN
Enable is
On.)
Set to
Default
WLAN
Enable
Restores all network settings of the internal print server to the factory default.
Factory
Reset
The factory settings are shown in Bold with an asterisk.
1
On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
Reset Menu
Display Shows
Reset Printer
Factory Reset
The factory settings are shown in Bold with an asterisk.
Color Correction
Submenu
Color Calibration
The factory settings are shown in Bold with an asterisk.
Menu Selections
Status
Signal
Channel
Speed
SSID
Comm. Mode
Description
Resets the printer and restores all printer settings (including command settings) to settings
you have previously made with the control panel buttons.
Resets the printer and restores the printer settings (including command settings) to the
factory default settings.
Menu Selections Options
Calibrate
Reset
Options
Ad-hoc*/Infrastructure Shows the current
Off*/On
Descriptions
Carry out calibration to revise the
colours. (See Calibration
on page 96.)
Set the calibration parameters back
to the default settings. (See
Calibration on page 96.)
Control Panel
Descriptions
Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Communication Mode.
Restores wired network settings
of the internal print server to the
factory default.
Chooses Ethernet link mode.
3
90