Face Detection - Lorex D862 Series Quick Setup Manual

Face detection

ATTENTION: Facial recording without consent is illegal in certain jurisdictions. Lorex Technology
does not assume liability for any use of its product that fails to conform with local laws.
To configure face detection settings:
1. From the camera's live view, right-click and then click Main Menu.
2. Enter the system user name (default: admin) and password.
3. Click EVENTS > Face Settings > Face Detection.
4. Configure the following:
a. Select a connected camera. Face
detection is
only available up to 2
channels.
b. Click Enable. Smart motion
detection has to be disabled on
all channels.
c. Click Setup > Schedule to set the
weekly schedule.
d. Set preferences for how the
system reacts to a detected face.
e. Click Apply to save.
a
b
c
e
d
17