Chapter 4 Troubleshooting; Identifying Your Problem - Brother HL HL-1270N User Manual

CHAPTER 4
TROUBLESHOOTING

Identifying your problem

First, check the following:
The power plug is connected correctly and the printer is turned on.
All of the protective parts have been removed.
The toner cartridge and drum unit are installed correctly.
The Front Cover is completely closed.
Paper is loaded correctly in the paper cassette.
The interface cable is securely connected between the printer and computer.
The correct driver for the printer is installed and selected.
The PC is set up to connect to the correct printer port.
Printer does not print
If you did not solve your problem with the above checks, please find your problem in the following list
and go to the recommended section.
Printer LED is blinking
Status Monitor Error
Message appears
Printed Error Message
Paper Handling
Other
Pages are printed, however there are problems with:-
Print quality
Printout is incorrect
Network Problems
Go to "Control Panel Indications" on page 4-2.
Go to "Error messages in the Status Monitor" on
page 4-6.
Go to "Error Messages printouts" on page 4-8.
Go to "Paper Handling" on page
JAMS and how to clear them" on page 4-10.
Go to "Others" on page 4-15.
Go to "Improving the print quality" on page 4-17.
Go to "How to Print correctly" on page 4-23.
Please see Network User's Guide
4-1

CHAPTER 4 TROUBLESHOOTING

4-9, or "PAPER