Keys And Parts; Charge The Battery - Beats Wireless User Manual

Hide thumbs Also See for Wireless:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
UK English

Keys and Parts

The headset contains the following parts:
Multifunction key
Track back
Volume down
Indicator lights
Charger connect
Before using the headset, you must charge the battery and pair the headset
with a compatible device.
8
Play/Pause key
Track forward
Volume up
Microphone
3.5 mm cable port
UK English

Charge the Battery

The headset contains a Micro USB cable which can
be connected to your computer or other device
made for USB charging. Plug the Micro USB end of the
included USB cable into the micro USB port charger
connector under the left earcup of the headphone.
Plug the other end into a USB port on your computer
or other devices made for USB charging. The indicator
light will be red while charging. Once fully charged,
the indicator light will be a steady green. Charge time
is one hour on an empty battery. The fully charged
battery has power for up to 10 hours talking and/or
music time and up to 100 hours standby time.
Note:
You can still enjoy your music while charging your
headphone.
Warning:
(1) Please pay attention to the environmental aspects
of battery disposal. Battery must be recycled or
disposed of properly. (2) Batteries (battery pack or
batteries installed) should not be exposed to excessive
heat, such as sunshine, fire or the like.
9

Advertisement

Table of Contents
loading

Table of Contents