Product Features - Zte ZXHN F680 User Manual

Interface/Button Description
On/Off
Power
PON
USB2
Reset
WPS
Wi-Fi
• The Reset button, Wi-Fi button, WPS button and USB2 interface are on a side of the ZXHN F680 device.
5

Product Features

Interfaces
�
GPON interface:
G.984.1–G.984.5 standards
�
Ethernet interface: four auto-sensing 100/1000 Mbps RJ-45 interface in com-
pliance with IEEE 802.3 and IEEE 802.3u.
�
Phone interface: RJ-11
�
WLAN interface: complies with IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g
and IEEE 802.11n.
�
USB interface: standard USB 2.0 and USB 3.0 interface.
Technical Features
�
Broadband service access: Connected to Internet through the GPON access
method.
�
Ethernet service access: Provides Ethernet interfaces, connected to the Eth-
ernet devices, such as the user PC. Provides the Internet access and IPTV
services.
�
Phone service access: Supports SIP protocol.
�
WLAN: Users can connect to the ZXHN F680 through WLAN.
�
Data sharing, backup, and restoration: provides the USB 2.0 and USB 3.0
interface connected to a USB storage device for file sharing, fast backup, and
data restoration.
Power switch.
12 V DC power connector.
PON interface.
Standard USB 2.0 interface, connected to a USB storage device
for file sharing, fast backup, and data restoration.
Reset key used when the device is powered on and activated.
�
By using a thin needle, press the key inside the hole and then
immediately release the key, and then the device is restarted.
The configurations will not be lost.
�
By using a thin needle, keep pressing the key inside the hole for
more than five seconds, and then the device is restored to the
factory defaults.
Wi-Fi protection button. To enable the Wi-Fi protection function,
press this button, so that users can access the network without
entering their passwords.
WLAN button for enabling or disabling the 2.4G/5G WLAN
function.
GPON standard, SC/APC, comply with ITU