Electrolux EUF2744AOW User Manual page 17

6
13. Connect the cable to the connecting
point in the front panel (8).
14. Put back the top front covers on both
sides (5,9).
15. Place the display cable, which is
currently disconnected, into the cable
holder in the door end cap then put
back the door end cap cover (10).
8
7
10
9
16. Remove handle cover pins (A) and
handle plugs (C).
C
17. Unscrew the handle (B) and fix it on
the opposite side.
18. Insert cover pins (A) and handle
plugs (C) on the opposite side.
Do a final check to make
sure that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature is
cold (i.e. in Winter), the
gasket may not fit perfectly
to the cabinet. In that case,
wait for the natural fitting of
the gasket.
In case you do not want to
carry out the above
mentioned operations,
contact the nearest
Authorised Service Centre.
The Authorised Service
specialist will carry out the
reversibility of the doors at
your cost.
ENGLISH 17
B
A