Brother BE-0901E Replacement Manual page 2

4. Unplugging all wire connector harnesses. P1, P2, P3, P4, P5, P6, P7, P8, P9, P10, P11 and
P12.
5. Unplug all connectores to remove board. However, keep in mind that connectors only go
in one spot and can not be confused.
6. Board is held inplace by plastic clip locks. In order to unlock you will need to squeese
locks and lightly pull-up on board to release.
(Fig. 1-1)
plastic clip locks
B E S - 9 1 6 ,
B E S - 9 1 6 ,
For Technical Assistance Please Call Toll Free 1-877-4BROTHER
R
EPLACING
9 0 1 , 1 2 1 6 ,
9 0 1 , 1 2 1 6 ,
H B
EAD OARD
2
1 2 0 1 A C
1 2 0 1 A C
Four-clip locks
hold board down.
plastic clip locks