CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.4
Network Board (for HL-1270N only)
(1) Open the rear cover.
(2) Remove the two M3x8 Taptite screws to remove the access cover.
Taptite, bind M3x8
(3) Remove the two M3x6 Taptite screws securing the network board.
(4) Disconnect the connector connected with the main PCB and remove the network board.
Network board
Taptite, cup M3x6
Access cover
Fig. 4-15
Fig. 4-16
4-10
Rear cover