Brother P-touch PT-2200 User Manual page 53

To change the size setting:
1 While holding down
current size setting.
2 While still holding down
displayed and is shown by the size indicators.
3 Release
With the AUTO setting selected and 3/4" (18-mm) or 1" (24-mm)-wide tape
installed, text consisting of just one line of only capital letters will be printed with a
character size of 48 point.
EXAMPLE
To select the 24 point size setting:
1
While holding down
once, and keep
2
While still holding down
pressing
3
Release
, press
, continue pressing
to apply the selected size setting to the entire text.
Size
until 24 is displayed.
.
Size
once, and keep
Size
, press
held down.
Caps
, continue
Caps
held down to display the
Size
until the desired size setting is
S I Z E
Alt
A U T O
S I Z E
Alt
2 4
Length
Undl/Frm
Wide
Length
Undl/Frm
Wide
49