System Configuration - Dell Latitude 7200 2-in-1 Service Manual

Table 2. General options (continued)
Option
Battery Information
Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time

System configuration

Table 3. System Configuration options
Option
SATA Operation
Drives
82 System setup
Description
The options are:
● System Information
● Memory Configuration
● Processor Information
● Device Information
Displays the battery status and the type of AC adapter
connected to the computer.
Allows you to change the order in which the computer
attempts to find an operating system.
The options are:
● Windows Boot Manager—Enable or disable the Windows
Boot Manager option.
● Boot List Option—You can add, delete, and view the
boot options.
Enable or disable the UEFI Network Stack option.
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
● Always, Except Internal HDD—Default
● Always
● Never
Allows you to set the date and time. The change to the
system date and time takes effect immediately.
Description
Allows you to configure the operating mode of the integrated
SATA hard-drive controller.
The options are:
● Disabled
● AHCI
● RAID On—By default, the RAID On option is enabled.
NOTE: SATA is configured to support RAID mode.
Allows you to enable or disable various drives on board.
The options are:
● SATA-0
● SATA–1
● M.2 PCIe SSD-0
● M.2 PCIe SSD-1
By default, all the options are enabled.