Dell Latitude 7200 2-in-1 Service Manual page 17

8. Insert the plastic scribe into the gap created in step #1 and with a suction cup (optional), pry open the display assembly from
the bottom-left corner of the front side of the system. Work your way around the right side of the display assembly.
9. Carefully flip the display assembly over from the top edge and lay the display assembly face-down next to the display back
cover. Do not pull away the display assembly from the base. The display assembly is still connected to the system board on
the base via the display cable. Carefully flip the display assembly over and disconnect the display cable.
Disassembly and reassembly 17