Table of Contents
Advertisement
Installation & Operation
Note
Before you install the devices, read this section carefully to ensure trouble-free installation
and commissioning.
The devices can only be used in conjunction with the RTLS localization system.
The device is intended for installation in a vehicle. Installation is to be performed by qualified
and trained users according to the operating instructions. In addition, installation must take
place in accordance with the respective instructions for the installation of electrical systems
and utilities.
Note the specifications in the section "Technical specifications (Page 15)" during installation
and operation.
Make sure that the ambient temperature does not exceed 50 °C and that the device is not
installed in a location where it is exposed to direct sunlight.
Connection of the cables
Make sure that the wiring is correct before you commission the device.
SIMATIC RTLS4060T
Operating Instructions, 01/2021, C79000-G8976-C550-03
Installation & Operation
3
13
Advertisement
Table of Contents
