Communication Using Bluetooth Technology - Brother MPrint MW-140BT Software Manual

Communication using Bluetooth
technology
In order for this printer to communicate using Bluetooth tech-
nology with the computer running Windows
PC, various Bluetooth settings must be specified.
The following instructions show you the basic procedures for
make a Bluetooth communication. For details, refer to the
instruction manual for your Bluetooth device.
1
Set the MW-140BT the
Bluetooth switch to
ON.
→ The status indicator
light will be blue.
2
Run the Bluetooth connection software on the
computer running Windows
3
The computer running Windows
PC searches for Bluetooth devices and the
printer is detected.
→ "MW-140BTxxxx" is detected. "xxxx" is a last 4 digit
of its serial number.
4
Select this printer from the list of devices.
→ The screen to enter the "PIN code" (or "Pass key")
will appear. Only the first time that the computer run-
ning Windows
printer will this screen appear.
6
communication ON
®
or the Pocket PC is connected to the
®
or the Pocket
Bluetooth
®
or the Pocket PC.
®
or the Pocket