Appendix A Default Settings - National Instruments PXI-8150 Series Getting Started

Default Settings
© National Instruments Corporation
This appendix summarizes the hardware default settings for the
PXI-8150 Series kits. If you need more information about a particular
setting or if you want to try a different configuration, refer to the
PXI-8150 Series User Manual.
Table A-1. PXI-8150 Series Hardware Default Settings
Hardware Component
W1 (CPU Board)
CMOS Clear
W3 (CPU Board)
INTS Connection
W4 (CPU Board)
INTP Connection
W1 (I/O Board)
Ethernet EEPROM
(PXI-8156 only)
Ethernet Settings
(PXI-8156 only)
GPIB Settings
(PXI-8156 only)
Disabled (Normal CMOS operation)
Serial IRQ Connected to INTS
No Connection to INTP
Enabled. Do not alter this setting.
I/O Address = 0x300
IRQ = 9
I/O Address = 0x2c0
IRQ = 11
DMA = Disabled
A-1 Getting Started with Your PXI-8150 Series
Appendix
A
Default Setting