Tools Required - Fein KBM 65U Repair Instructions

KBM 65U, JCM 256U

4. Tools required

Standard tool
- Torx 15 and 20 screwdrivers
- 2 x cross screwdriver
- Slotted screwdriver
- Socket wrenches: sizes 2.5; 3; 4; 5
- Size 17 ring wrench
- Arbor press
- Plastic hammer
- Punch
- Rubber hammer
- Circlip pliers for
inner and outer rings
- Inner bearing puller, 6-10 mm
- Inner bearing puller, 12-16 mm
- Inner bearing puller, 18-22 mm
NOTE
You can only order special tools with an order number from FEIN.
C-SC_CSSM Version 1.0
Special tool
- Drift key
- Press-on fixture
- Drawing-off socket cap
- Chuck cone
- Hook
All rights reserved by FEIN, especially in case of industrial rights registration.
2013.06
FEIN retains all rights of disposal, such as copying and circulation.
Order number
6 33 05 003 00 3
6 41 01 019 00 8
6 41 04 150 00 8
19 mm 6 41 07 019 00 7
26 mm 6 41 07 026 00 0
6 41 22 121 01 0
6/82