E N V I R O N M E N T - Brother HL-1230 User Manual

E n v i r o n m
E n v i r o n m
•
The printer should be installed near a power outlet that is easily accessible.
•
Use the printer only within the following ranges of temperature and humidity:
•
Ambient temperature: 10°C to 32.5°C (50°F to 90.5°F)
•
Ambient humidity: 20% to 80% (without condensation)
•
The printer should be used in a well-ventilated room.
•
Place the printer on a flat, horizontal surface.
•
Keep the printer clean. Do not place the printer in a dusty place.
•
Do not place the printer where the ventilation hole of the printer is obstructed. Keep
a gap of approximately 100 mm (4 inches) between the ventilation hole and the
wall.
•
Do not place the printer where it is exposed to direct sunlight. Use a blind or a
heavy curtain to protect the printer from direct sunlight when the printer is
unavoidably placed near a window.
•
Do not place the printer near devices that contain magnets or generate magnetic
fields.
•
Do not subject the printer to strong physical shocks or vibrations.
•
Do not expose the printer to open flames or salty or corrosive gasses.
•
Do not place objects on top of the printer.
•
Do not place the printer near an air conditioner.
•
Keep the printer horizontal when carrying.
e n t
e n t
1-7
CHAPTER 1 ABOUT THIS PRINTER