Installation; Landline Telephone Connection - Serene SEREONIC ALERT CA-360Q User Manual

Installation:

01. Install four AA size rechargeable NiMH batteries in battery
compartment at bottom of unit.
Warning: Do not use regular batteries, as charging of this type
can cause batteries to leak and damage to the unit.
Note: The CA-360Q will operate without batteries, but installing
batteries is highly recommended to continue system operations
in case of a power outage.
02. Plug AC adapter into outlet and connect the plug to the unit.
03.
Connect bed shaker to SHAKER-1 output jack.
04.
Press the SPK button to set the volume (speaker icon).
05. Verify the "M" indicator is shown. Default is master mode.
Land Line Telephone Connection:
01.
Connect an analog telephone to the PHONE OUT jack on the
back.
02.
Connect a telephone cord to the LINE IN jack on the back of the
unit.
03.
Place a call to the telephone number corresponding to the
connected telephone line.
04.
Verify that all alerting outputs - display icon, flasher, ring tone,
and bed shaker (if connected) - respond correctly while the
telephone is ringing.
05. Verify that by answering the call (from any telephone), all alerting
outputs will stop.
Copyright 2020 Serene Group, Inc. All rights reserved.
EN
Telephone
10.