Brother MFC-J615W Quick Setup Manual page 25

Wired Network
e
If the machine is configured for your network,
choose the machine from the list, and then click
OK.
Note
• If your machine is not found over the network,
confirm your network settings.
• If this screen appears click OK.
Enter a name for your Macintosh in
Display Name up to 15 characters long and
click OK. Go to f.
The name you enter will appear on the
machine's LCD when you press the SCAN key
and choose a scan option. (For more
information, see Network Scanning (For
models with built-in network support) in the
Software User's Guide on the documentation
CD-ROM.)
f
When this screen appears, click Next.
g
When the Brother Support screen appears,
click Close to finish the installation or go to
step 19.
19
Download and install
Presto! PageManager
When Presto! PageManager is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a
Click the Presto! PageManager icon to go to
the Presto! PageManager download site, and
follow the on-screen instructions.
Install MFL-Pro Suite on
20
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 18 on page 24. Also see
step 16 on page 23 before you install.
The installation is now
Finish
complete.
Note
If you specify an IP Address for the machine, you
must set the Boot Method to Static by using the
control panel. For more information, see the
Network User's Guide on the documentation
CD-ROM.
Macintosh
25