For Mac Os ® 9.1 To 9.2; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-8660DN Quick Setup Manual

Step 2
For USB Interface Cable Users
For Mac OS
Make sure that you have finished the instructions from Step 1 "Setting Up
the machine" on pages 4 - 11.
For Mac OS
to Mac OS
(For the latest information for Mac OS
http://solutions.brother.com)
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the drivers and MFL-Pro Suite. If the
language screen appears, choose your
language.
26
Installing the Drivers & Software
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 user, upgrade
®
X 10.2.4 or greater.
®
, if you already connected an
®
.
5
Click MFL-Pro Suite to install.
®
X, visit
6
Follow the on-screen instructions, and
restart your Macintosh
7
After the DeviceSelector window appears,
connect the USB interface cable to your
Macintosh
The DeviceSelector window will not appear if
you have connected a USB interface cable to
the machine before restarting your
Macintosh
previously installed version of the Brother
software. If you encounter this problem
continue with the installation but skip Step 9.
You should choose your Brother machine
from the Model pull-down list in the main
screen of ControlCenter2 (For details, see the
Software User's Guide on CD-ROM).
®
.
®
and then to the machine.
®
or if you are overwriting a