Brother MFC-8460N Quick Setup Manual page 19

8
When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
(For Windows
®
(For Windows 98/98SE/Me/2000)
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine. Brother
recommends that you connect the
machine directly to your computer.
®
XP)
9
Plug in the power cord and turn on the
machine.
0
®
For Windows 98/98SE/Me/
2000 Professional users, click Next.
®
Windows XP users should wait for a while;
installation of the Brother drivers will start
automatically. The installation screens
appear one after another.
DO NOT try to cancel any of the
screens during this installation.
A
When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
Continued ...
17